ログイン
言語:

WEKO3

  • トップ
  • ランキング
To
lat lon distance
To

Field does not validate



インデックスリンク

インデックスツリー

メールアドレスを入力してください。

WEKO

One fine body…

WEKO

One fine body…

アイテム

  1. 所属別コンテンツ
  2. ハリス理化学研究所
  3. 紀要論文
  4. 同志社大学ハリス理化学研究報告
  5. 58(4)
  1. 紀要論文
  2. 研究所
  3. 同志社大学ハリス理化学研究報告
  4. 58(4)

熱可塑性エポキシ母材の高分子量化による平織炭素繊維複合材料の疲労寿命の向上に関する研究

https://doi.org/10.14988/pa.2017.0000016909
https://doi.org/10.14988/pa.2017.0000016909
de02a77d-bd4f-4105-a7c1-4614f6d51c7a
名前 / ファイル ライセンス アクション
023058040004.pdf 023058040004.pdf (1.1 MB)
Item type 紀要論文 / Departmental Bulletin Paper(1)
公開日 2018-02-14
タイトル
タイトル 熱可塑性エポキシ母材の高分子量化による平織炭素繊維複合材料の疲労寿命の向上に関する研究
言語 ja
タイトル
タイトル ネツ カソセイ エポキシ ボザイ ノ コウブンシリョウカ ニヨル ヒラオリ タンソ センイ フクゴウ ザイリョウ ノ ヒロウ ジュミョウ ノ コウジョウ ニカンスル ケンキュウ
言語 ja-Kana
タイトル
タイトル Improvement of fatigue life of plain-woven carbon fiber composite by highly polymerization of thermoplastic epoxy
言語 en
言語
言語 jpn
キーワード
主題 炭素繊維複合材料, 疲労寿命, 熱可塑性エポキシ母材, 層間破壊じん性, 界面せん断強度
carbon fiber composite, fatigue life, thermoplastic epoxy matrix, fracture toughness, interfacial shear strength
資源タイプ
資源タイプ識別子 http://purl.org/coar/resource_type/c_6501
資源タイプ departmental bulletin paper
ID登録
ID登録 10.14988/pa.2017.0000016909
ID登録タイプ JaLC
アクセス権
アクセス権 open access
アクセス権URI http://purl.org/coar/access_right/c_abf2
著者 西田, 裕紀

× 西田, 裕紀

WEKO 3176
CiNii ID 9000383212614

ja 西田, 裕紀

ja-Kana ニシダ, ヒロノリ

en Nishida, Hironori

Search repository
大窪, 和也

× 大窪, 和也

WEKO 16550
CiNii ID 1000060319465
e-Rad_Researcher 60319465

ja 大窪, 和也

ja-Kana オオクボ, カズヤ

en Okubo, Kazuya

Search repository
藤井, 透

× 藤井, 透

WEKO 16551
CiNii ID 1000020156821
e-Rad_Researcher 20156821
AID DA08732137

ja 藤井, 透

ja-Kana フジイ, トオル

en Fujii, Toru

Search repository
著者所属
言語 ja
値 西田, 裕紀 / Graduate School of Science and Engineering, Doshisha University
著者所属
言語 ja
値 大窪, 和也 / 同志社大学理工学部エネルギー機械工学科教授
著者所属
言語 ja
値 藤井, 透 / 同志社大学理工学部機械システム工学科教授
著者所属(英)
言語 en
値 Doshisha University
所属機関識別子種別
値 kakenhi
所属機関識別子
値 34310
抄録
内容記述タイプ Abstract
内容記述 本研究の目的は,熱可塑性エポキシを母材とする平織CFRTP(炭素繊維強化熱可塑性プラスチック)の重量平均分子量が疲労寿命および炭素繊維束に沿った内部き裂成長に及ぼす影響を調べることである.そのために,曲げ疲労試験後の層間および繊維/樹脂界面の状態を観察した. ENF(End Notched Flexure)試験およびマイクロドロップレット試験を実施し,繊維と樹脂との間の層間破壊じん性および界面せん断強度をそれぞれ測定した.更に,炭素繊維周辺の母材き裂伝播の挙動の変化を議論するために,母材の分子量を変化させ,モデル試験片の両側に導入した2つの予き裂が接続する確率の変化を測定した.曲げ疲労特性は,熱可塑性エポキシ母材の分子量を増加させることによって改善された.母材の重量平均分子量を大きくすることにより層間破壊じん性が向上し,母材の重量平均分子量の条件によってそれらの破壊面の状態が異なることが判明した.母材の重量平均分子量が上昇により,繊維と母材との間の界面強度も改善された.モデル試験片の2つの予き裂が接続する確率は,分子量の上昇に従って減少した.つまり,母材の高分子量化に伴う界面せん断強度の向上により,き裂進展経路が界面を回避する効果が得られることが分かった.
言語 ja
抄録
内容記述タイプ Abstract
内容記述 The purpose of current study is to investigate the effect of weight-average molecular weight of the thermoplastic epoxy matrix on the fatigue life and its internal crack growth along carbon fiber bundle of the plain-woven CFRTP (Carbon Fiber Reinforced Thermo-Plastic). States of interlaminar and fiber/resin interface were observed after the bending fatigue test. Interlaminar fracture toughness and interfacial shear strength between fiber and resin were measured by ENF (End Notched Flexure) test and micro droplet test, respectively. To discuss the behavior of matrix crack propagations around reinforcing carbon fiber, the probability for connecting two matrix cracks initiated in the both sides of model specimen was measured after critical failure, when the molecular weight of the matrix was changed. The bending fatigue property was improved by increasing the molecular weight of the thermoplastic epoxy matrix. It was found that the interlaminar fracture toughness was improved by increasing the weight average molecular weight of the matrix, and the state of fracture surface was varied depending on the condition of weight average molecular weight of the matrix. Interfacial strength between fiber and matrix was also improved, when the weight average molecular weight of the matrix was elevated. The probability for connecting two off-set matrix cracks in the model specimen was reduced according to the elevation of molecular weight. It was found that the crack propagation along the interfacial between fiber and matrix was prevented due to the increase of interfacial shear strength, when the weight average molecular weight of the matrix was elevated.
言語 en
書誌情報 ja : 同志社大学ハリス理化学研究報告
en : The Harris science review of Doshisha University

巻 58, 号 4, p. 187-195, 発行日 2018-01-31
出版者
出版者 同志社大学ハリス理化学研究所
言語 ja
出版者(英)
出版者 Harris Science Research Institute of Doshisha University
言語 en
ISSN
収録物識別子タイプ PISSN
収録物識別子 21895937
書誌レコードID
収録物識別子タイプ NCID
収録物識別子 AA12716107
権利者情報
権利者識別子Scheme AID
権利者識別子URI https://ci.nii.ac.jp/author/DA18202107
権利者識別子 DA18202107
権利者名 同志社大学ハリス理化学研究所
言語 ja
権利者名 Harris Science Research Institute of Doshisha University
言語 en
関連サイト
関連タイプ isFormatOf
識別子タイプ URI
関連識別子 https://doors.doshisha.ac.jp/opac/opac_link/bibid/SB12902196/?lang=0
言語 ja
関連名称 掲載刊行物所蔵情報へのリンク / Link to Contents
出版タイプ
出版タイプ VoR
出版タイプResource http://purl.org/coar/version/c_970fb48d4fbd8a85
日本十進分類法
主題Scheme NDC
主題 501.49
戻る
0
views
See details
Views

Versions

Ver.1 2023-07-27 17:35:32.406382
Show All versions

Share

Mendeley Twitter Facebook Print Addthis

Cite as

エクスポート

OAI-PMH
  • OAI-PMH JPCOAR 2.0
  • OAI-PMH JPCOAR 1.0
  • OAI-PMH DublinCore
  • OAI-PMH DDI
Other Formats
  • JSON
  • BIBTEX

Confirm


Powered by WEKO3


Powered by WEKO3