@article{oai:doshisha.repo.nii.ac.jp:00029319,
 author = {下楠薗, 壮 and Shimokusuzono, So and 田中, 達也 and Tanaka, Tatsuya and 笹田, 昌弘 and Sasada, Masahiro and 紀藤, 駿介 and Kito, Syunsuke and 関川, 玄徳 and Sekikawa, Gentoku},
 issue = {3},
 journal = {同志社大学ハリス理化学研究報告, The Harris science review of Doshisha University},
 month = {Oct},
 note = {熱可塑性樹脂を成形する方法として，射出成形は最も一般的な方法である．しかし，射出成形では様々な成形不良が発生する．その原因は，可塑化された樹脂の溶融状態に影響されると考えられる．さらに，その溶融状態は可塑化工程におけるスクリュの挙動に影響されると考えられる．そこで，射出成形における可塑化工程でのスクリュ後退速度を調査し，樹脂溶融体の安定性を把握することとした．本研究では，射出成形における回転速度，背圧，加熱シリンダの温度の条件がスクリュ後退速度に与える影響を明らかにした．実験結果から，スクリュ後退速度は，樹脂の溶融安定性に影響されると考えられた．また，実験条件とスクリュ後退速度の関係を明らかにした．, Injection molding is the most common method of molding thermoplastic resins. However, various defects were occurred in injection molding. It is considered that the cause of defects was influenced by the melt state of plasticized resin. Furthermore, it is considered that the melt state was influenced by the behavior of screw in the plasticization process. Therefore, the screw retracting speeds during the plasticization process in injection molding was investigated to understand the stability of the resin melt. In this study, the influence of the condition of rotational speed, back pressure and heat in the injection molding on the screw retracting speed was clarified. From experimental results, it was thought that the screw retracting speed was affected by the melt stability of the resin. In addition, the relationship between experimental conditions and screw retracting speed was clarified., application/pdf},
 pages = {155--162},
 title = {射出成形における樹脂可塑化工程時のスクリュ後退挙動に関して},
 volume = {63},
 year = {2022},
 yomi = {シモクスゾノ, ソウ and タナカ, タツヤ and ササダ, マサヒロ and キトウ, シュンスケ and セキカワ, ゲントク}
}